Brand New CLD500 Fast NOx Analyzer by CAMBUSTION, in its original packaging, though we sell it as Surplus system. 
The system include the following
Box Number
Contents
Qty
Serial Number
Box type
 
 
 
 
Cabinet
Cabinet
Ozone Generator
Ozone Destroyer
Ozone Drier
Ch1 Sample Probe
Ch2 Sample Probe
Spare Sample Probe
Turbo Probe
700mm Long Probe
CAL-APT
Gas Fitting Kit
1
1
1
1
1
1
1
1
1
3
1
N/A
B12-0517
N/A
N/A
35
39
S1175
20
1629
N/A
N/A
 
 
 
 
 
Cabinet
1
CLD500 MCU
Tools &Spares Kit
Manual
Test Summary Sheet
UI Software
1
1
1
1
1
4053
NA
NA
NA
NA
 
 
MCU Box
2
CLD500 Umbilical
CLD500 Head
Manfrotto Tripod
ManfrottoBall-Head
In Line Filter Kit
Head Cosies
2
2
2
2
1
2
NA
30394-15/30394
NA
NA
NA
 
 
MSU Box
3
XDS5 Vacuum Pump
1
119502040
Vac Pumb Box
4
NOX convertor  
2
 
Conduit Box
 
Conventional emissions analyzers
 
The Chemi Luminescence Detection (CLD) measurement principle is the industry-standard method of measuring engine exhaust NO concentration. Conventional CLDs have response times of 1-2 seconds, and are typically used to measure "bag emissions" where the concentration changes very slowly.
 
A need for fast emissions analyzers
 
During the 1-2 seconds it takes a conventional CLD to respond, an engine will undergo many firing cycles. The conditions inside the combustion chamber can vary significantly between successive firing cycles- particularly when the engine conditions are changing rapidly such as during engine start or speed/load transients. The Cambustion CLD500 (sometimes known as an fnox or fast NOx analyzer) has a time response as low as 2ms T10-90%. This allows the CLD500 to distinguish between two adjacent firing cycles, and even offer information about the variation in NO concentration during a single exhaust stroke.
 
Benefits of fast emissions analyzers
 
Accurate measurement of exhaust emissions brings valuable insights into engine operation, and assists calibration engineers in reducing the engine out emissions. This can assist in emissions compliance while reducing after-treatment costs.
 
Optional Converter for NOx Measurement
 
The CLD500 can also measure NO2 through the use of optional NOx converters (based on the stainless steel method of NO2 to NO conversion). With these converters the CLD measures total NOx. (There is a cross-sensitivity to ammonia and other reductants in the sample). When fitted with the NOx convertors, a 10ms T10-90% response time is achieved.
The ability to record NO emissions data on such a fast time scale has opened up a range of study areas.

For quick datasheet click here ,
For Full details of th System from the manufacture website click her CLD500